Mechanical Engineering Project topics

By | December 11, 2015

This post contains Mechanical Engineering Project topics.

  • 3 axis digital accelerometer
  • 3d-kinematics of biological joints
  • 4-wheel independent suspension
  • A clean biodiesel fuel produced from recycled oils and grease trap oils
  • A double-wall reactor for hydrothermal oxidation with supercritical water flow across the inner porous tube
  • A fluid-solid interaction model of the solid phase epitaxy in stressed silicon layers
  • A hypersonic hybrid vehicle
  • A managtoreological semi active isoolator to reduce noise and vibration transmissibility in automobiles
  • A theory of anharmonic lattice statics for analysis of defective crystals
  • Abrasion wear characteristics of sand cast al-7075
  • Abrasive blast cleaning
  • Acoustic parking system (aps)
  • Active control of near-wall turbulent flow
  • Active electrically controlled suspension
  • Active roll-over protection system in automobiles
  • Active suspension system a mechatronic system
  • Advanced diesel common rail systems for future emission legislation
  • Advanced energy conversion systems
  • Advanced internal combustion engine research
  • Advanced safety features in nuclear reactors
  • Advances in capillary fluids modeling
  • Advances in cutting tool technology
  • Advances in gas turbine
  • Advances trends in manufacturing technology optical fiber sensors in medicine
  • Aems automotive engine management system using meqa squirt kits
  • Air bearing next generation bearings
  • Air cushion vehicles
  • Air pollution from marine shipping
  • Air powered car
  • Alternate fuel cells for automobiles
  • Alternative abrasive to diamond
  • Alternative fuel vehicles
  • Alternative fuels hydrogen in internal combustion engines
  • Alternative system to the domestic refrigerating system
  • An electronic system for controlling air/fuel ratio of gaseous fuelled engine
  • An expert system based design of 3-dof robot
  • Analysis and design methods of distributed sensor
  • Analysis of material using digital radioscopy
  • Antilock braking system
  • Aqua silencer – a noise & emission controller
  • Arcjet rocket
  • Aspheric lenses
  • Assembly of water cooler
  • Atkinson cycle engine
  • Atomic battery
  • Atomistic characterization of dislocation nucleation and fracture
  • Auto drilling with geneva
  • Automated gray water recovery system
  • Automatic automotive block heater connection
  • Automation and robotics
  • Automobile ac by utilising waste heat & gases
  • Automobile air conditioning
  • Automobile braking systems
  • Autonomous submarines
  • Babbitt metal
  • Ball piston engine
  • Ball piston engine a new development in rotary engines
  • Battery electric vehicle
  • Bench top wind tunnels
  • Bike of the future- pneumatic bike
  • Bio-diesel – the next generation fuel source
  • Bio-ethanol as fuel
  • Biogas
  • Biologically inspired robots
  • Biomass fuelled power plant
  • Biomass gasification
  • Boosting gas turbine energy efficiency
  • Bose suspension system
  • Breakthroughs in engine efficiency
  • Caged ball technology
  • Camless engine with elctromechanical valve actuator
  • Carbon fibre on f1 cars
  • Ceramic hybrid ball bearing
  • Cfd analysis of a simple convergent flow using ansys flotran 10.0
  • Challenges in plasma spray assembly of nanoparticles to near net shaped bulk nanostructures
  • Coded modulation techniques for direct-detection
  • Collision warning system
  • Combustion control using optical fiber
  • Common rail direct injection (crdi) engines
  • Comparison of experimental and finite element results for elastic plastic stress
  • Compresed air cars technology
  • Concentrating solar power energy from mirrors
  • Condition monitoring of bearings by echo pulse method
  • Constitutive modelling of shape memory alloy using neural networks
  • Contactless energy transfer system
  • Corrosion resistant gear box
  • Cross hybrid source routing protocol for wireless adhoc networks
  • Data fusion for quality improvements in complex solar cell manufacturing processes
  • Deformation-assisted transformations in nanocrystalline and amorphous alloys
  • Dendritic solidification using phase-field method
  • Desert cooler
  • Design and development of modified operational controls on single mold machine
  • Design and development of weeding machine
  • Design and fabrication of artifically engineered material composites for electromagnetic systems
  • Design for manufacturing a giant lip in world class manufacturing
  • Design of a medical device and its network for generating
  • Design of an active car chassis frame incorporating magneto rheological fluid
  • Design of automated guided vehicles for flexible manufacturing systems
  • Development in arc welding process using robot
  • Development of an agv material. Development of high performance
  • Development of an ultrasound sensor for high energy medical applications
  • Diffusion flame shapes and thin filament diagnostics
  • Digital water marking for color images using dwt and its applications
  • Ductile mixed-mode fracture criterion development and crack growth simulations
  • Dynamics of cutting viscoelastics materials
  • Effecient pnumatic motor design (compressed air energy recovery system)
  • Embedded applications design using real-time
  • Evaluation of high-power endurance in optical fiber links
  • Experimental characterization and numerical modeling of a float glass furnace
  • Fadec – full authority digital engine control.
  • Finite element analysis of robotic arm for optimal work space determination
  • Friction welding of austenitic stainless steel and optimizatin of weld quality
  • Frictionless compressor technology
  • Full colour 3d modelling using rapid prototyping
  • Functional nanocrystalline ceramics
  • Fused deposition modelling
  • Gas hydrates: alternative for natural gas in future
  • Gear noise reduction by new approaches in gear finishing processes
  • Heat pipes for dehumidification and air conditioning
  • Heat recovery steam generator (hrsg)
  • Heat recovery system for internal combustion engine. (steam or likewise)
  • Job scheduling using neural network foe rapid manufacturing
  • Laser micromachining
  • Latest in hitech petrol fuel injection gdi (gasoline direct injection)
  • Magnetorhilogical semi-isolator to reduce noise and vibration transmibility to automobile
  • Mechatronic strategies for torque control of electric powered screwdrivers
  • Micro scale regenerative heat exchanger
  • Microscale breaking waves and air-sea gas transfer
  • Micro-scale milling
  • Modeling of circulatory system and adventure in computer
  • Modelling of circulatory system
  • Modern centrifugal compressors
  • Moulds in casting of plastics and thermoforming
  • Multifunction control system for robotic fire detection
  • Multiple material milling platform
  • Nanocrystalline thin-film si solar cells
  • Nanoventions micro-optic modeling and control of micro-scale systems
  • Nauticus machine calculatons
  • New finite element analysis for unsteady 3d natural convection
  • Nuclear power potential as major energy source
  • Ny-tran – alternative to v belts
  • Optimizing centrifugal pump
  • Para-gliding-landing with cygnus airbag safety system
  • Pendolina system for railway passenger comfort
  • Performance evaluation of methanol blended fuels in s. I. Engines
  • Performance evaluation of solar still thermo electric mode
  • Permanent magnet generator
  • Perpetual motion machines
  • Photo acoustics of small gas clouds
  • Power frequency magnetic fields
  • Power from space for use on earth
  • Power generation by compressed air final
  • Power generation by using road speed breakers
  • Power system contingencies
  • Practical fuel-cell vehicles
  • Problems and control of backfire for hydrogen
  • Process quality model in scm performance measurements
  • Processing and tribo behaviour of nylon clay nanocomposites under abrasive wear mode
  • Protein encapsulation using u.v peg hydrogels
  • Proton exchange membrane fuel cell
  • Pseudoelasticity and shape memory in metal nanowires
  • Quasiturbine future trends in automobile engine
  • Rapid prototyping technique based on 3d welding
  • Redesign of brake assembly of formula sae car
  • Reliability redundancy design-using simulation
  • Remote signal acquisition and interface unit for focal ultrasound surgery procedures
  • Remote signal acquisition and signal processing for focal ultrasound surgical procedures
  • Research on modified layers of material surface for cr12 mov cold die
  • Secure user authentication using automated biometrics
  • Selective catalytic reduction (SCR)
  • Shock absorber testing system
  • Six – stroke hybrid engine
  • Size reduction of window air conditioner
  • Skid steer loader and multiterrain loader
  • Solar chimney power generation system
  • Solar energy conservation to hydrogen112
  • Solar heat energy storage in phase change materials
  • Study and design of waveguide notch filter for a frequency of 28 ghz.
  • Tabletop thermoacoustic refrigerator for demonstrations
  • Temporary house stairs that can be folded up and meet safety standards (used when building houses)
  • The gyro machine : using non planar mechanism
  • The hy-wire car
  • Thermo acoustic refrigeration
  • Thread locking device for handling thread at flexible endoscopy
  • Topographic characterization and modeling of the precision surface grinding process
  • Triptronic automatic gear transmission
  • Turbine technology in automobile
  • Ultrasonic nondestructive testing
  • Ultrasonic phased array for defect cartlization
  • Underwater acoustic data communication
  • Underwater welding
  • Underwater wind mill
  • Unmanned mine spotter
  • Valvetronic engine technology
  • Vibration analysis of flywheel using finite element analysis
  • Water diesel emulsion with high injection press
  • Water jet cutting technology
Author: Ravi Bandakkanavar

A Techie, Blogger, Web Designer, Programmer by passion who aspires to learn new Technologies every day. A founder of Krazytech. It's been 10+ years since I am publishing articles and enjoying every bit of it. I want to share the knowledge and build a great community with people like you.

Suggested articles for you:

14 thoughts on “Mechanical Engineering Project topics

  1. gaurav k

    sir i am pursuing masters in production technology need an idea about my thesis topic related to catia and ansys software.

  2. blankRaviraj

    Sir, please tell me some interesting topic in thermal for project

  3. blankraviteja

    I require best topic in mechanical for my main project. Can you suggest me.

    1. blankRavi Bandakkanavar Post author


      Do something on fuel efficiency or an alternative to fuel usage. You got to work on it a lot.
      As an alternative you can use batteries to generate power and build a storage mechanism. You need to analysis on this.

  4. blanklaxmi

    Plzz give some topics to do ppt and plzz with information which u r give topic name


Did it help? Would you like to express?