Presentation Topics for Mechanical Engineering

This post lists latest presentation topics for Mechanical engineering. These topics have been picked from wide areas of Mechanical Engineering like Robotics, Automobiles, Nano Technology etc.

• Adaptive Crusie Control Plus System
• Ablative Materials
• Abrasive Blast Cleaning
• Active Electrically Controlled Suspension
• Active roll-over protection system in Automobiles
• Adaptive control
• Advanced Battery and Fuel Cell Development for Electric Vehicle
• Advanced composites
• Advanced Cooling Systems
• Advanced Propulsion Methods
• Advanced Quadruped Robot – BigDog
• Advanced Rocket Motors
• Advances in Capillary Fluid Modelling
• AeroCapture
• Aerodonetics
• Aerospace Flywheel Development
• Aerospikes
• Air Augmented Rocket
• Air Casters
• Air Cars
• Air Cushion Vehicles
• Air Powered Cars
• Air suspension system
• Scramjet Engine
• All Aluminium Alloy Conductors (AAAC)
• ArcJet Rocket
• Autocollimator
• Automatic Conveyor for Industrial Automation
• Automated Guided Vehicle System
• Adaptive control for 3-D overhead crane systems
• Electronic Fuel Injection (EFI)
• Magnetic Levitation Train
• Autonomous Submarines
• Ball Piston machines
• Bench top wind tunnels
• Bio-degradable polymers
• Biomass Fuelled Power Plant
• Twin-Turbo or Biturbo
• Blended Winged Aircraft
• Camless engine with electromechanical valve actuator
• Carbon Foam-Military Applications
• Cryogenic Treatment of Brake Rotors
• Car Speed Control by Blue Tooth
• Carbon nanotube cloths
• Carbon Nanotubes
• Collision warning system
• Compressed Air Cars
• Common Rail Direct Injection (CRDI) Engines
• Composite materials
• Compound Vortex Controlled Combustion
• Continuously Variable Transmission
• Conditional monitoring & fault Diagnosis
• Contactless energy transfer system

Suggested Read:

Technical paper presentation topics for CSE
Presentation Topics for Civil Engineering

• Corrosion resistant gear box
• Crew Exploration Vehicles
• Cruise Missile Technology
• Cryogenic Grinding
• Cushioning Impact in Pneumatic Cylinder
• Dark Room machining
• Digital manufacturing
• Double-wishbone suspension
• Advantages of tubeless tires
• Drive-By-Wire Systems
• Driver information system (DIS)
• Dual Clutch Transmission
• Dynamic Ride Control (DRC)
• Dynamic shift program (DSP)
• Eco-Friendly Surface Treatments
• Bomb Detection Robotics using Embedded Controller
• Traffic Light Control System
• Adaptive Cruise Control System
• Maglev Levitation Trains
• Vapor Absorption Cooling System
• Combustion Stability in I.C. Engines
• E-gas
• Electromagnetic Brakes
• Electric Power Assisted Steering
• Electromagnetic Valves
• Electric Power Assisted Steering
• Electrochemical Machining (ECM) & EBM
• Electromagnetic Bomb
• Electron beam machining
• Electronic Road Pricing System
• Energy Conversion and Management
• Energy efficient turbo systems
• Engineering Applications of Nylon 66
• Ergonomics
• F1 Track Design And Safety
• Full Authority Digital Engine Control
• Floating Power Stations
• Floating Solar Power Station
• Fluid Energy Milling
• Fly ash utilization
• Flywheel Batteries
• FMS (Flexible Manufacturing Systems)
• Fractal Robot
• Free Form Modelling Based on N-Sided Surfaces
• Frictionless Compressor Technology
• Fuel Cell Airplane
• Fuel cell powered Go-Karts
• Fuel Cells on Aerospace
• Fuel Energizer
• Fuels from Plastic Wastes
• Low-cost anti-lock braking and traction control
• Arial Photography Using Remote Flying Robot
• Electronic Vehicle Identification in the Intelligent City
• Hexapod Robots
• Robotic Surgery
• Hydrogen (water) Powered vehicle
• Carbon fiber reinforced plastic Composites
• Dynamic Car Parking Negotiation and Guidance Using an Agent-Based Platform
• Full Colour 3D Modelling Using Rapid Prototyping
• Functional Nanocrystalline Ceramics
• Fuzzy logic in Aircraft stability
• Geo-Thermal Energy
• Handheld Radiation detector
• HANS-In F1 Racing
• Harvesting Wave power
• Heavy duty Gasoline engines
• Difference between tubeless and with tube tires
• High Altitude Aeronautical Platforms
• High angle of attack aerodynamics
• High-Speed Precise Gear Boxes
• High-Speed Trains
• Highly Productive And Reconfigurable Manufacturing SystemHigh-Wire car
• Hovercrafts
• Tanker Robot For Vision Based Surveillance System
• Sensor Based Motion Control Of Mobile Car Robot
• Involuntary Train Collision Prevention System
• Hybrid Energy Systems
• Hybrid Motorcycles Hybrid Synergy Drive (HSD)
• Hydraulic railway recovery systems
• Hydrogen Car
• Hydrogen Generation via Wind Power Electrolysis
• Hy-Wire Car
• Infrared Curing And Convection Curing
• Infrared Thermography
• Intelligent Compact drives
• Inter-Continental Ballistic Missile (ICBM)
• Jelly Filled Telephone Cables
• Jet Powered Boat
• Jet Stream windmill
• Jetex Engine
• Kalina cycle
• Load Sensing Hydraulics
• Latest in hi-tech petrol fuel injection GDI (Gasoline Direct Injection)
• Latest Trends in Automotive Engg.& Technology
• Launching Space Vehicles from Moon
• Lean Burn Spark Ignition Engine
• Lean engineering
• Lightweight material-Carbon fiber
• Liquid Injection Thrust Vectoring (LITV)
• Logistics and supply chain management
• Low-Cost Spacecraft Simulator
• Magnetic Levitation
• Magnetic Nanocomposites
• Magnetic Refrigeration
• Marine electric propulsion
• Mass Rapid Transit system (MRTS)Mechanical torque limiters
• MEMS in Industrial Automation
• Mesotechnology
• Metal-Matrix Composite ProcessingMicro Batteries
• Micro Fluidic Chips
• Micro Gravity
• Micro Heat Exchangers
• Micro hydraulics
• MicroTopography
• Miller Cycle Gas Engine
• Modeling and simulation
• Modular conveyor belts
• Modular Gear motor
• Molten oxide electrolysis
• Multi Valve Engine
• Nano Fluids Thermal Applications
• Magneto Abrasive Flow Machining
• Multi Point Fuel Injection System
• Six Stroke Engine
• Nanobatteries
• Cell Phone Operated Robot
• Low-Cost Wind Power Plant
• Vacuum Brakes
• Vehicle Speed Sensing and Smoke Detecting System
• Fire Fighting Robot
• Nanomaterial-based Catalyst
• Nanorobotics
• Nono Fluidics
• Nuclear fuel reprocessing
• Nuclear Power Potential as Major Energy Source
• Ocean Thermal Energy
• Oil Shear Technology
• Oil well drilling
• Opto-Electronic Sensor System
• Orbit Forming
• Orbital WeldingOrbital/Space Mechanics
• Pendolino system for railway passenger comfort
• Perpetual Motion Machines
• Photonic Crystals
• Pint Sized Power Plants
• Plasma arc welding
• Plastic WeldingPolymers castings
• Porous Burner Technology
• Portable X-Ray Fluorescence Analyser
• Power from Space for use on EarthProcess Automation Techniques

 

• Pseudoelasticity and Shape Memory in Metal Nanowires
• Pulse Detonation Engine
• Pulsed Plasma Thruster
• Pump Noise level reduction methods
• Quantum Chromo Dynamics
• Random vibrations
• Rapid Injection Moulding
• Recent Trends in Quality Management
• Regenerative Fuel Cells
• Resistojet Rocket
• Responsive manufacturing
• Rijke Tube
• Robot-driven cars (Autonomous car)
• Robotic Assistants for Aircraft Inspectors
• Humanoid Robots
• Robots in Radioactive Environments
• Selective Catalytic Reduction (SCR)
• Self Healing Spacecraft
• Self-Healing Polymer Technology
• Semi-synthetic cutting fluids
• Sensotronic Braking System
• Single Crystal Turbine Aerofoil
• Sky Rocket
• Solar Impulse – Solar Powered Flight
• Solar Powered Refrigerator
• Solid Liquid Separation Technology
• Space Elevator
• Space Robotics
• Space Shuttle
• Space Shuttle Boosters
• Space Station
• Spacecraft Propulsion
• Special materials for high-temperature applications
• Stealth Radar
• Synthetic polymers
• Stealth Technology
• Steer-By-Wire
• Stereoscopic Projection Systems
• Stirling engine
• Super Flat Nano Films
• Supercavitation
• Superconducting Rotating Machines
• Synthetic Aperture Radar
• Tension Control Brake
• Thermo Acoustic Refrigeration
• Thermoacoustic refrigerator
• Threadless Couplings
• Tire & wheel without pneumatics
• Tool Management System
• Touch trigger probes
• Trends in welding
• Turbines in silicon
• Ultra Nano Crystalline Diamond
• Underwater Welding
• Underwater windmill
• Vacuum Braking System
• Valvetronic Engine Technology
• Variable compression ratio engine
• Variable Length Intake Manifold (VLIM)
• Variable Valve Timing in Internal Combustion Engines
• Vertical Landing and takeoff engine
• Weld flaw detectors
• Welding Robots
• Wind-diesel System